Exhaust Assembly And Installation; Installation Instructions; Exhaust Nozzle Connection - Royal Sovereign ARP-1000ES Owner's Manual

INSTALLATION INSTRUCTIONS

Connect exhaust hose assembly to the back of the unit. Extend hose to desired length and locate the exhaust nozzle through a window or
wall for ventilation.
DO NOT add additional hose length. This will diminish the efficiency of the unit. Window spacer only comes in one size. Good for double
hung or slider window only.

EXHAUST ASSEMBLY AND INSTALLATION

Exhaust nozzle Exhaust nozzle connector
1. Insert ends of exhaust hose into exhaust nozzle connector and exhaust hose connector by twisting clockwise
until it stops.
2. Attach the exhaust hose connector onto the rear outlet of the unit and turn to the right.
3. Attach the exhaust nozzle to the window spacer with the 4 screws provided.
4. Connect the exhaust nozzle connector to the exhaust nozzle.
5. Extend the exhaust hose and close the window as far as possible trapping the exhaust nozzle as shown below .
6. Install rubber plug as shown below.
Exhaust hose Exhaust hose connector
5
ARP-1000ES

Exhaust nozzle connection

Insert exhaust nozzle from rear.
Attach screws from front.
rubber plug