Troubleshooting - Royal 359 Assembly And Operating Instructions Manual

Troubleshooting

Problem
Burners will not light
using the ignition
system
Burner will not light
with a match
Low flame or flashback (fire
In burner tube - a hissing or
roarIng noise may be heard)
Gas valve knob difficult
to turn
Possible Cause
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets
or gas hose
Electrode or pushbutton
Ignition wire is loose
or disconnected
Electrode or wire is damaged
Incorrect electrode gap/
Bent collector box
Flat battery in ignition assembly
Poor connection of battery in
Ignition assembly.
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets
or gas hose
LP gas bottle too small
Obstructions in burners
Obstructions in gas jets
or gas hose
Windy conditions
Gas valve jammed
23
Solution
Replace with full gas bottle
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Reconnect wire
Change electrode and wire
The gas collector box around the electrode
needs to be in line with the burners with a
gap of 3 to 4mm between the end of the
electrode and the tag on the bottom of the
collector box. Realign the collector box as
required.
Replace battery
Ensure battery is firmly
Pushed onto connectors.
Replace with full gas bottle
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Use larger gas bottle
Clean burners
Clean jets and gas hose
Use BBQ in a more sheltered position
Replace gas valve