1. Manuals
  2. Brands
  3. Royal Manuals
  4. Grill
  5. 359
  6. Assembly and operating instructions manual

Royal 359 Assembly And Operating Instructions Manual

4 burner s/s roaster/cabinet gas barbecue
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Assembly and Operating Instructions
for ROYAL 4 Burner S/S Roaster/Cabinet Gas Barbecue
Drawings are not to scale.
Specifications subject to change
without prior notice.
•
•
•
•
•
•
WARNING
•
•

FOR YOUR SAFETY

If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and contact
your local dealer.
Royal 4 S/S Roaster/Cabinet
For outdoor use only.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced.
1.
2.
FOR YOUR SAFETY
Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359

Advertisement

Table of Contents
loading

Related Manuals for Royal 359

Summary of Contents for Royal 359

  • Page 1: For Your Safety

    Assembly and Operating Instructions for ROYAL 4 Burner S/S Roaster/Cabinet Gas Barbecue Royal 4 S/S Roaster/Cabinet Drawings are not to scale. Specifications subject to change without prior notice. • For outdoor use only. • Read instructions before using the appliance. Failure to follow instructions could result in death, serious bodily injury, and/or property loss.

  • Page 2: Parts List

    R/H Bracket Screw, M6x15 Nut, M6 Bolt, M6x90 Washer HARDWARE Spacer Wing Nut, M6 Screw, M5x10 Nut, M5 Pre-Assembled Component Quantity varies according to model purchased Appearance, size, and construction may differ according to model purchased ROYAL 4 Burner S/S...
  • Page 3 Royal 4 S/S Roaster/Cabinet Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram’.
  • Page 4 Hardware Reference Diagram Specifications subject to change without prior notice. Part E1 (22pcs), E2 (22pcs) Part E3 Bolt (8pcs) Part E4 Washer (8pcs) Part E5 Spacer (8pcs) Part E6 Wing Nut (8pcs) Part E8 (4pcs) Part E1 (6pcs) Part E7 (4pcs)
  • Page 5 Assembly IMPORTANT! • Tools Required: Medium size flat blade or Phillips/Crosspoint screwdriver, adjustable spanner or metric spanner set • The assembly of this barbecue requires 2 people. • Carefully unpack the trolley box and remove all internal packaging before commencing assembly. •...
  • Page 6 Attach the Top Panel (C12) to the L/H (C9) and R/H (C11) Panels with the Screws (E1) and Nuts (E2). Attach the Support (C24) between the Top and Bottom Panels using the Screws (E1) and Nuts (E2).
  • Page 7 Attach the Back Panel (C13) to the assembled portion of the cabinet using the Screws (E1). Screw the Casters (C19) into the L/H Panel and the Lockable Casters (C20) into the R/H Panel.
  • Page 8 Remove the Screws from the L/H Panel. Attach the L/H Side Burner Shelf (C3) to the L/H Panel by replacing the Screws. Remove the Screws from the R/H Panel. Attach the R/H Side Shelf (C5) to the R/H Panel by replacing the Screws.
  • Page 9 Insert Spacers (E5) into holes in the sidewall of the body and turn 90 degrees to lock in place. Carefully lay the Barbecue Body (B1) onto the supports on the cabinet. WARNING: DO NOT RELEASE THE BARBECUE BODY WHILE THE BARBECUE HAS NOT BEEN PROPERLY SEATED.
  • Page 10 Cuisine Electronic Ignition Assembly Diagram Blue Black Yellow Black Side Burner 9V Battery (Included) Ignition Pushbutton Connect the wires as shown in the diagram.
  • Page 11 Attach the Magnet Strips (C18) to the Top Panel (C12) and Bottom Panel (C14) using the Screws (E1) and Nuts (E2). Insert the gas hose (C7) through the hole to the inlet of main manifold. Ensure the mating faces of the connection are clean and not damaged. Do not use any sealing tape, paste, or liquid on the joint.
  • Page 12 Connect the gas hose (C13) to the side burner valve of side Burner Shelf. Ensure the mating faces of the connection are clean and not damaged. Do not use any sealing tape, paste, or liquid on the joint. The nut must be tightened with the use of a spanner.
  • Page 13 Attach the Tool Hook (C4) to the L/H Side Burner Shelf using the Screws (E1) and Nuts (E2). Attach the Towel Rail (C6) to the R/H Side Shelf using the Screws (E1) and Nuts (E2). Remove the plastic wrap from the Briquette Baskets (B9) and lay them into the body ensuring that they lie level within the body.
  • Page 14 Attach the L/H and R/H Brackets (D5, D6) to the Barbecue Body using the Screws (E7) and Nuts (E8). Hang the Rotisserie Motor (D4) to the R/H Bracket. Place the Forks (D2) onto the Spit Rod (D3) and insert the Spit Rod into the Slot in the Motor.
  • Page 15 Slide the Drip Tray (B6) into place underneath the barbecue body. Place the Foil Liner (B8) into the Drip Pan (B7) and slide into place. Number of gas valves to be tested may vary according to model of barbecue. All joints and connections must now be leak tested before using the barbecue. For details of leak testing, please refer to instructions on Page 19.

  • Page 16: Rotisserie Kit Assembly

    Always cook foods on the lowest flame setting to avoid burning or overcooking. The handle of the spit rod can be unscrewed to allow for simultaneous use of the side burner.

  • Page 17: Essential Information

    • Side Burner - Open the lid of the side burner. Never light the side burner with the lid closed. Turn the gas regulator or gas bottle valve to the ‘on’ position. Push the side burner control knob in and turn it to the high position.

  • Page 18: Gas, Regulator And Hose

    • If you intend to leave your barbecue outside, make sure it is protected from the elements with a heavy duty cover. These are available from most Royal stockists. • Store your barbecue in a cool dry place. It must be inspected on a regular basis as damp or condensation can form which may result in damage to the barbecue.

  • Page 19: Installation

    Suitable regulator: Butane – outlet pressure 28mbar Propane – outlet pressure 37mbar Hose • Check that the gas hose does not touch any part of the barbecue that may become hot during operation. • If the hose shows any sign of damage it must be replaced with a hose that is suitable for use with LPG (liquid petroleum gas) and meets British Standards.
  • Page 20 Insert a long, lit match through the match-lighting hole in the right hand side of the body of the barbecue until the lit end is alongside the right hand burner. Push and turn the right hand control knob anti-clockwise to the high position taking care to protect yourself from flames.

  • Page 21: Care And Maintenance

    Do not leave the barbecue uncovered and exposed to the elements when not in use. Heavy duty covers are available from your Royal stockist. Even when your barbecue is covered for its protection, it must be inspected on a regular basis as damp or condensation can form which may result in damage to the barbecue.
  • Page 22 Paint Hood ends Aluminium Hood handle Door handles Side burner Stainless Centre of hood Doors Side burner lid Shelf insert Control panel Galvanised Drip tray Cast Iron Burners Side burner grid Cleaning Method Recommended Enamel is a thin, glass based coating fused onto metal and as such needs to be treated with care.

  • Page 23: Troubleshooting

    Obstructions in burners Obstructions in gas jets or gas hose Low flame or flashback (fire LP gas bottle too small In burner tube - a hissing or roarIng noise may be heard) Obstructions in burners Obstructions in gas jets or gas hose...

  • Page 24: Technical Specifications

    Technical Specifications Model Name Heat Input Approval Royal 13kW 4 Burner S/S 0359 359BR128 Side Burner 2.8kW Countries of Use: BE, CY, CZ, EE, FR, GR, IE, IS, IT, LV, LT, LU, PT, SK, 3+(28-30/37) ES, CH, GB CY, CZ, DK, EE, FI, GR, LV, LT, LU, MT, NL, NO, SK, SI,...

Table of Contents