Table of Contents
Advertisement
You can also charge the battery using the USB cable connected to a
powered-on computer or a USB power adapter when the device is off
or in sleep mode. If you want to charge the device via USB cable while
using the device (i.e., eReader in night-read mode) you must reduce the
screen brightness to near the lowest level or the device will not charge.
For more information, refer to the User Guide.
USB Power adapter
Wall outlet
If the LED blinks while the device is connected via USB cable, you
can either increase the screen brightness to begin discharging
the battery (LED goes off) or reduce the screen brightness to start
charging the battery (LED becomes steady green).
IMPORTANT: When charging with the USB cable, the required charge
time is longer than when using the AC adapter.
2 Turn the Device On
1. Press & hold the power button until the Pandigital logo appears. If
you are charging the device, the Pandigital logo appears after the
battery icon appears.
2. During the boot up process, the Pandigital logo is displayed a second
time, followed by the Pandigital splash screen, and then upon
completion the setup wizard Welcome screen is displayed.
Computer
(powered on)
USB cable
Device top
5
Advertisement
Table of Contents
