List Of Rights - Siemens SINUMERIK 840Dsl Configuration Manual

User administration

4.4 List of rights

4.4 List of rights
Below is the list of rights a user is assigned:
Table 4-3 List of rights
Method
GiveUserAccess
34
Description
Sets the specified access rights for a user. The rights below can be combined in any combi‐
nation.
Input Arguments:
User
Realm
Some possible realm strings are:
"StateRead"
"StateWrite"
"FrameRead"
"FrameWrite"
"SeaRead"
"SeaWrite"
"TeaRead"
"TeaWrite"
"ToolRead"
"ToolWrite"
"DriveRead"
"DriveWrite"
"GudRead"
"GudWrite"
"FSRead"
"FSWrite"
"PlcRead"
"PlcWrite"
"AlarmRead"
"RandomRead"
"RandomWrite"
"SinuReadAll"
"SinuWriteAll"
Example:
GiveUserAccess ("MyUser", "GudRead; PlcWrite")
Sets the read access for user data for the "MyUser" user and sets the write access for the PLC.
User name which is to given the rights
The access rights to be set as a string.
If a user wants to set several rights, they must
be separated by a semicolon.
Status data - NC, channel, axis, read access
Status data - NC, channel, axis, write access
Zero offsets, read access
Zero offsets, write access
Setting data, read access
Setting data, write access
Machine data, read access
Machine data, write access
Tool and magazine data, read access
Tool and magazine data, write access
Drive data, read access
Drive data, write access
User data, read access
User data, write access
File system, read access
File system, write access
PLC, read access
PLC, write access
Allows to subscribe to alarms
Random (and ReadVar method), read access
Random (and WriteVar method), write access
All of the read access operations mentioned
All of the write access operations mentioned
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 04/2018, 6FC5397-1DP41-0BA0