Siemens SINUMERIK 840Dsl Configuration Manual page 29

– E.g. read, write, setup monitoring
– The attributes of a NodeID can be queried via the entry "View Attributes". One of these
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 04/2018, 6FC5397-1DP41-0BA0
Figure 3-11 NodeID "Sinumerik > Channel > Parameter > R"
attributes is the "Value", which provides the corresponding value of R1.
Figure 3-12 Viewing node attributes
Setting up of OPC UA server
3.5 Testing the connection
29