Hardware Installation Guide For The Cisco 1100 Series Integrated Services Router - Cisco 1100 Series Hardware Installation Manual

Specification
Description
Input voltage
Frequency
Input current
Surge current
Ports
Micro USB Port
USB port
Console port
10/100/1000 Gigabit Ethernet
Wireless VLANs
Wireless specifications
Default and maximum DRAM
Default and maximum flash
Inline PoE
Acoustic for Cisco 1100 Series ISRs

Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router

12
Overview of Cisco 1000 Series Integrated Services Routers
Specification
Universal 100 to 240 VAC
50-60 Hz
PoE not enabled: 0.82A maximum
PoE enabled: 1.55A Maximum
90 A peak and less than 8 Arms per half cycle
One RJ-45: Separate console port
USB 3.0 Type A host port
USB devices supported:
• USB flash memory
One USB 5-pin micro Type B: Console management
connectivity
Two GE ports allocated among RJ45 and SFP as:
One combo port with 10/100/1000RJ-45 Ethernet
port or SFP Ethernet port (labeled GE0/0/0)
One dedicated 10/100/1000RJ-45 Ethernet port
(labeled GE0/0/1)
32 (encrypted and non-encrypted VLANs)
2x2 .11ac Wave 2
4GB
4GB
4 ports for -8P PIDs, 2 ports for -4P PIDs
802.3af-compliant PoE or 802.3at-compliant PoE+
Not Applicable - Fanless design