Parts Available For The Sl2100 - NEC SL2100 Quick Install Manual

NEC SL2100 Communication System

Parts available for the SL2100

Not all parts are included within this guide, please refer to the other SL2100 Quick Install Guides or the SL2100
Hardware Manual for a full description and installation instructions of all parts available.
IP7WW-4KSU-C1
IP7WW-1PRIDB-C1
IP7EU-CPU-C1
IP7EU-CPU-C1-A
IP7WW-EXIFB-C1
IP7WW-EXIFE-C1
IP7WW-SDVMS-C1
IP7WW-SDVML-C1
IP7WW-3COIDB-C1
IP7WW-2BRIDB-C1
IP7WW-000U-C1
IP7WW-VOIPDB-C1
IP7WW-082U-B1
IP7WW-308U-A1
IP7WW-008U-C1
IP4WW-Battery Box
161893001-A
Refer to Prophix for all parts and licenses available in your region.
SL2100 Terminals are included in separate Quick Install Guides
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1
SL2100 Chassis unit
ISDN PRI card
SL2100 CPU card
SL2100 CPU card with pre-
installed IP licenses and 2hour
InMail
Expansion interface card
Expansion interface card
InMail voicemail
Analogue trunk daughter card
2BRI card
Trunk carrier card
VOIP card
8 Digital Extension (2wire) and 2
SLT extension card
8 Hybrid Extension (4wire)
extension card
8 Analogue extension card
Battery box
Rack mount shelf
Included within this guide
Interface card required to connect to the
expansion chassis
Interface card installed into the expansion
chassis
Provides 15/120 hour voicemail
3 analogue trunks, max. 4 per unit
2 x BRI circuits, 4 trunks
Require when 082E or 008E card is not
available to install the 2BRIDB,1PRIDB or
3COIDB card
16 IP resources, expand to 128 with licenses
8 digital and 2 SLT extension interfaces, max
3 per unit
8 hybrid extension interfaces, max 4 per unit
8 analogue extension interfaces, max 4 per
unit
External battery box for power fail backup
(batteries not included)
Rack mount for SL2100 chassis unit
5