Patch Panel; Spare Parts Ips Dm; Mat Software - NEC SOPHO 2000 IPS User Manual

960051151300
Note: discontinued.

4.15Patch Panel

The 24 Port patch panel is meant for installation in a 19" rack, in use with the SOPHO
2000 IPS or IPS DM(R). The standard RJ21 cabling and gender converter can be used to
connect swiftly to the PIM. Each patch panel has a one-one relation with the Champ
(RJ21) connector in the PIM.
The 24 port patch panel is very attractive because of the right connections (pin 25 and 50
of PIM 0 for minor and major alarm).
12NC
960051150230 24 PORT PATCH PANEL

4.16Spare parts IPS DM

Following spare parts have been defined for the SOPHO IPS DM:
12NC
960051151306
960051151494

4.17MAT software

The MatWorX SW provides the Operational Maintenance interface with the system,
either via the RS232C interface on the MP or via the IP-interface on the M606.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
upto
ALARM DSPP
11
Description
(PBC)
Description
109P0624H7D09 FAN
PZ-PW131
X X X External Alarm Display Unit.
Requires locally supplied cable to connect between
Alarm DSPP and MDF. Provides Power-On, Major -
Alarm and Minor-Alarm indications.
X X X Patch Panel for Digital and Analogue Station /
Trunk ports.
One Patch Panel for every three-card slot in PIM.
• Pre-wired private labeled 24 Port Patch Panel with
RJ45 jacks on the front and 50 Position male champ
connector on the back.
• 19" Rack Mount Dimensions: 482.6mm x 43.9mm
(1RU)
- X X FAN UNIT (One included in each PIMMD)
- X X AC/DC Power (One included in each PIMMD)
CHAPTER 3 TERMINALS
Function
Function
Page 114