Table of Contents
Advertisement
Table 3-2 continued
Classification
Log Entry
Informational
MM/YY HH:MM:SS:mmm:
DNS: [symbolic.name]
is xxx.xxx.xxx.xxx
Informational
NTP: We got our date
and time updated
Informational
Genisys station YY
went inactive
Informational
WAGs Report In request
was issued
Informational
Responded to WAGs
Report In request
3.21 CLEARING THE LOG
Clearing the log removes the information in the log. It does not delete any configuration or
routing table information.
MAKE SURE THE USER WANTS TO CLEAR THE LOG INFORMATION FROM
THE WAG. THE USER WILL NOT BE PROMPTED FOR CONFIRMATION AND
THE USER CANNOT RECOVER THE LOG AFTER IT HAS BEEN CLEARED.
To Clear the Log:
Type log2 and press Enter. The log information is deleted.
Document No.: COM-00-05-16
Version: C.1
Description
Indicates the symbolic name that was passed
to a DNS server which resulted in the name
being resolved to the indicated IP address.
MM = month
YY= year
HH = hour
MM = minute
SS = second
mm = millisecond
When the WAG receives a response from a
Simple Network Time Protocol (SNTP) Server,
the WAG will log the fact.
When the WAG is operating in Genisys ATCS
Office mode, if a Field station that previously
heard drops out of communication and
doesn't respond after 30 seconds, the fact that
the station was dropped gets logged.
When the "WAGREPORT" command is issued
(described later) this system event is logged by
the WAG that issued the request.
When another WAG on the LAN is used to
issue a "WAGREPORT" command (described
later) this system event is logged by the WAG
that hears the request and responds to it.
CAUTION
3-27
OPERATION
June 2006, Revised June 2014
Advertisement
Table of Contents
Troubleshooting
