Safety Guidelines - Elation PIXEL DRIVER 4000 User Manual

S A F E T Y G U I D E L I N E S
DO NOT shake device, avoid brute force when installing and/or operating device.
DO NOT operate device if the power cord is frayed, crimped, damaged and/or if any of the
power cord connectors are damaged and do not insert into the device securely with ease.
NEVER force a power cord connector into the device. If the power cord or any of its
connectors are damaged, replace it immediately with a new one of similar power rating.
DO NOT block any air ventilation slots.
All fan and air inlets must remain clean and never blocked.
Allow approx. 6" (15cm) between the device and other devices or a wall for proper cooling.
When installing device in a suspended environment, always use mounting hardware that is no
less than M10 x 25 mm, and always install device with an appropriately rated safety cable.
Always disconnect device from main power source before performing any type of service
and/or cleaning procedure. Only handle the power cord by the plug end, never pull out the
plug by tugging the wire portion of the cord.
Consistent operational breaks will ensure the device will function properly for many years.
ONLY Use the original packaging and materials to transport the device in for service.
www.elationlighting.com
7