Selecting Manual Mig Welding (Dx Models Only) - Miller MigMatic 300 Owner's Manual

5-17. Selecting Manual MIG Welding (DX Models Only)

4
OM-251958 Page 36
5
1 Setup Button
2 Manual MIG Mode Indicator
Press and hold setup button for ap-
proximately 3 seconds to select
manual MG mode and light the in-
dicator.
3 Voltage Control S2
4 Wire Feed Speed (WFS)/Trim
(Arc Length) And Line Input
Adjustment Control R1
5 Digital Display Meter
.
In Manual MIG mode, the
operator may need to adjust
1
main welding parameters for
specific arc characteristics.
2
Use setup button to select desired
parameter: voltage, amperage, or
preset wire feed speed and light up
the corresponding LED (V, A, or %).
The value of the selected paramet-
3
er is displayed on the meter.
Turn voltage control clockwise to
increase voltage.
Turn wire feed speed control clock-
wise to increase wire feed speed.
Select trigger mode 2-t or 4-t ac-
cording to Section 5-13.
Ref. 956142845_4_14_A / 356029238_C