Picture - Philips 24PFL3603 User Manual

PICTURE

1
Press and use
PICTURE
Standard
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Normal
Color Temperature
Move Adjust
Select Back
2
Use to select the item you want to adjust, then press
OK.
To select the desired setting, then press OK.
(Standard, Dynamic, Soft or User)
Picture Mode
The brightness, contrast, color, tint and
sharpness are only available in User mode.
Cursor
To decrease
Brightness
brightness
To decrease contrast
Contrast
To decrease color
Color
intensity
To add red
Tint
To soften
Sharpness
To set the picture color temperature to Normal,
Warm and Cool.
Increase or reduce warm color of the picture
Color Temperature
personally (red), and the cool color personally
(blue).
To select the desired setting, then press OK.
(Format, Noise Reduction, Dynamic Contrast,
Advanced Settings
HDMI Mode and 120 PMR)
to select PICTURE, then press OK.
PICTURE
Advanced Settings
Move Adjust
Select Back
Cursor
To increase brightness
To increase contrast
To increase color
intensity
To add green
To sharpen
You can set a particular picture quality using Advanced
Settings.
Advanced Settings
Format
Noise Reduction
Dynamic Contrast
HDMI Mode
120 PMR
Move
Select
Format
Changing picture format
To select the desired setting, then press OK.
Noise Reduction
(Off, Low, Middle or High)
Off
Dynamic Contrast
On
Auto
HDMI Mode Video
Graphic
Off
120 PMR
On
21
Wide
Middle
Off
Auto
Off
Adjust
Back
p. 18
To set Dynamic Contrast to Off
To enhance contrast in an image
automatically
Automatic recognize the original
input signal
Set the output image to video
mode
Set the output image to graphic
mode
To set 120 PMR to Off
To make the video appear
smoother
Continued on next page.
.
English