Control Panel; Terminals - Philips 24PFL3603 User Manual

Control panel

a
Remote control sensor
Receives IR signal from remote control.
Do not block this remote control sensor window to allow proper
operation.
VOL + / –
Adjusts the volume. In the menu screen, moves the cursor
left (–) / right (+).
: Volume up
VOL +
: Volume down
VOL –
CH + / –
Selects a channel. In the menu screen, moves the cursor
up (+) / down (–).
When hold the CH + button about 3 sec., the main menu will
display on the screen.
When hold the CH – button about 3 sec., the source select menu
will display on the screen.
(POWER / STANDBY)
Turns the TV on from standby or off to standby mode.
b
c
d

Terminals

e f g h
Headphone audio output jack
Headphone 3.5mm stereo jack for personal listening.
Digital audio output jack
Digital audio (S/PDIF) output to home theaters and other digital
audio systems.
Analog audio (L/R) input jacks
Connect analog audio signals from;
HDMI-DVI / Analog audio (L/R) jacks signal
Component video / Analog audio (L/R) jacks signal
Composite video / Analog audio (L/R) jacks signal
PC connection / Analog audio (L/R) jacks signal from stereo mini
3.5mm plug audio cable on PC.
Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s)
for VIDEO
Composite video input (VIDEO) jack is a shared jack with
component video input (Y) jack.
HDMI input jack(s)
Digital audio and video input from high-definition digital devices
such as DVD / Blu-ray Disc™ players, cable or set-top boxes and
PC's.
75 ohm cable / Antenna connection
Signal input from an antenna, cable or set-top boxes.
USB terminal
Data input from USB memory stick only.
Do not connect any device to this terminal such as; digital camera,
keyboard, mouse, etc.
10 .
English
k
j
i
Continued on next page.