Table of Contents
Advertisement
Usage Notice
2
English ...
Precautions
Follow all warnings, precautions and maintenance as recommended in
this user's guide to maximize the life of your unit.
Warning-
Do not look into the projector's lens when the lamp
is on. The bright light may hurt your eyes.
To reduce the risk of fi re or electric shock, do not
Warning-
expose this product to rain or moisture.
Warning-
Please do not open or disassemble the product as
this may cause electric shock.
Warning-
When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
This product will detect the life of the lamp itself.
Warning-
Please be sure to change the lamp when it shows
warning messages.
Warning-
Reset the "Lamp Hour Reset" function from the On
Screen Display "Management" menu after replacing
the lamp module (refer to page 26)
When switching the projector off, please ensure the
Warning-
projector completes its cooling cycle before
disconnecting power.
Warning-
Turn on the projector fi rst and then the signal
sources.
Do not use lens cap when projector is in operation.
Warning-
Warning-
When the lamp reaches the end of its life, it will
burn out and may make a loud popping sound. If
this happens, the projector will not turn back on
until the lamp module has been replaced. To replace
the lamp, follow the procedures listed under "Re-
placing the Lamp".
Hide quick links:
Advertisement
Table of Contents
