Usage Notice; Precautions - Acer PD322 User Manual

Usage Notice

English ... 2

Precautions

Follow all warnings, precautions and maintenance as
recommended in this user's guide to maximize the life of
your unit.
Warning- Do not look into the projector's lens when the lamp is
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the "Lamp Hour Reset" function from the On
Screen Display "Management" menu after replacing the
lamp module (refer to page 25).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the
procedures listed under "Replacing the Lamp".
on. The bright light may hurt your eyes.