Parameter Edit Screen - Siemens 7SR45 Argus User Manual

2.11 Parameter Edit Screen

7SR45 Argus Relay allows the user to edit the parameter value in the LCD.
To edit any parameter, follow the procedure:
1. From the Relay Identifier screen, navigate to the Parameter screen.
2. In the Parameter screen, press ENTER key to display the edit screen.
3. In the Edit Screen, the user can edit the parameter value in the editable field.
4. Press ▲ key and ▼key to select the valid value.
5. Press ENTER to save the parameter value.
To discard the parameter value, press the CANCEL key
6. Press CANCEL until the Save and Restart pop-up screen is displayed.
7. Press ENTER to save the configuration in memory.
©2018 Siemens Protection Devices Limited
Chapter 1 - 7SR45 Description of Operation
.
Chapter 1 Page 23 of 48