Roland fm/am radio Owner's Manual page 31

MFX 11: WAH
Parameter Value
Filter Type
Filter Type LPF, BPF
When Control Type is set to "PEDAL," you
Manual 0–127 can use this parameter to modify the tonal
character.
Adjusts the amount of the wah effect that
will occur in the range of the center
Peak 0–127 frequency.
Set a higher value to narrow the range to
be affected.
When Control Type is set to "TOUCH,"
Sens 0–127 this adjusts the sensitivity to the volume
used in changing the tone.
Effect Control Types
TOUCH,
Control Type
PEDAL
Depth 0–127 Depth of modulation
Level 0–127 Output Level
Description
LPF: The wah effect will be applied over
a wide frequency range.
BPF: The wah effect will be applied over
a narrow frequency range.
TOUCH: The tone changes in response
to changes in the volume.
PEDAL: The tone changes according to
the function of the Manual parameter,
and controller number 4 (CC#4) of MIDI
message.
MFX 12: RING MODULATOR
Parameter Value
Adjusts the frequency at which
Frequency 0–127
modulation is applied.
Adjusts the amount of frequency
Sens 0–127
modulation applied.
Determines whether the frequency
modulation moves towards higher
Polarity UP, DOWN
frequencies (UP) or lower frequencies
(DOWN).
Low Gain -15–+15dB Boost or cut in the low end
High Gain -15–+15dB Boost or cut in the high end
D100:0W– Volume balance between the direct sound
Balance
D0:100W (D) and the effect sound (W)
Level 0–127 Output Level
Description
31