Setting of Patch
About this manual
• The screen images used in this manual are taken from a Fantom-G with the ARX-02 installed. The various procedures described also
assume that you are using the ARX-02 installed in a Fantom-G.
• For details on how to move the cursor or edit a value, refer to the owner's manual for the device in which you've actually installed the
ARX-02.
The Basic Screen
The basic screen shows the PATCH NAME, as well as the main
parameters of the patch.
20
Parameter
Description
Specifies the condition of the electric
Condition
piano.
Pickup Level
Volume of the electric piano tone.
Amp Level
Output Level of the "Pre Amp."
MFX Switch
Turns MFX on/off.
Pre Amp Switch
Turns Pre Amp on/off.
* For details on the parameters in MFX section, refer to "Selecting
an Effect (MFX Screen)" (p. 26)
* For details on the parameters in Pre Amp section, refer to "Select-
ing the Type of Pre Amp (Pre Amp Screen)" (p. 32)
Page
p. 22
p. 22
p. 32
p. 26
p. 32