Settings For The Roland Td-6/6V - Smartrigger TD-12 User Manual

Settings for the Roland TD-6/6V

Type
Splash CY-6
Crash CY-6
China CY-6
Ride Bow CY-6
Ride Bell CY-6
Hi Hat CY-6
Notes for using the Smartrigger CY-16RC3 Triple Zone Crash/Ride Cymbal:
 Connect one stereo cable from the bow trigger jack to the RIDE input on your module.
 Connect the other stereo cable from the bell trigger jack to the AUX input on your
module.
 IMPORTANT!!! Make sure you have the two inputs set to trigger the appropriate sounds
for each kit
o Ride Input HEAD = Ride Bow Sound
o Ride Input RIM = Ride Edge Sound
o AUX Input HEAD = Ride Bell Sound
o AUX Input RIM = Ride Edge Sound (Same as Ride RIM input)
Notes for using the Smartrigger CY-16R Dual Zone Ride Cymbal:
 Use the optional Y cable on the module end of the ride's stereo cable. Plug the black
TIP plug into the Ride input and the orange RING plug into any other available input.
Sens Thold
10 2
10 2
10 2
8 2
12 0
10 2
©2004 All Rights Reserved. http://www.smartrigger.com
Curve Scan
Linear 2.5
Linear 2.5
Linear 2.5
Linear 2.5
Linear 2.5
Linear 2.5
SMARTRIGGER USERS GUIDE
Version 1.4
ReTrg Mask
Can.
6 8
6 8
6 8
6 8
6 8
6 8
2/10/2010
Xtalk
40
40
40
40
40
40