Table of Contents
Advertisement
SMARTRIGGER USERS GUIDE
Version 1.4
2/10/2010
Triggering the Dual-Zone Ride
The Smartrigger ride cymbals use a dual-piezo design where the main piezo is mounted under
the bow of the cymbal in the trigger housing and a second piezo is mounted directly under the
bell of the cymbal. The main piezo is triggered when you play o the bow of the cymbal while
the second piezo is triggered when you play the bell of the cymbal.
Smartrigger's patent-pending design allows you to play the ride cymbal just as you would play
an acoustic cymbal. Light bell strokes are now possible by playing the bell of the cymbal with
the tip of your stick. You no longer have to "whack" the bell of the cymbal to reproduce a bell
sound from your drum module.
Because the ride cymbal uses a dual-piezo design, you will have to use a dual-piezo input on
your drum module or split the two piezo triggers into two single inputs using an optional Y
adapter. Settings and specifics for each module are provided below.
©2004 All Rights Reserved. http://www.smartrigger.com
Advertisement
Table of Contents
