Settings For The Roland Td-9 - Smartrigger TD-12 User Manual

o Aux Input HEAD = Ride Bell Sound
o Aux Input RIM = Ride Edge Sound (Same as #10 RIM)
Notes for using the Smartrigger CY-16R Dual Zone Ride Cymbal:
 Use the optional Y cable on the module end of the ride's stereo cable. Plug the black
TIP plug into the RIDE input and the orange RING plug into the AUX 1 input.

Settings for the Roland TD-9

Type
Splash CY8
Crash CY14C
China CY14C
Ride CY8
Bow
Ride CY8
Bell
Hi Hat CY-12H
Notes for using the Smartrigger CY-16RC3 Triple Zone Crash/Ride Cymbal:
 Connect the cable marked RIDE to the cymbal's bow trigger jack (left jack looking at the
bottom).
 Connect a separate stereo cable (not one in the cable harness) from the bell trigger jack
to the AUX input on the side of your TD-9 module.
 IMPORTANT!!! Make sure you have the two inputs set to trigger the appropriate sounds
for each kit
o Ride Input HEAD = Ride Bow Sound
o Ride Input RIM = Ride Edge Sound
o AUX Input HEAD = Ride Bell Sound
o AUX Input RIM = Ride Edge Sound (Same as Ride RIM input)
Notes for using the Smartrigger CY-16R Dual Zone Ride Cymbal:
 Plug a cable into the RIDE input. A Ride sound should be assigned to the HEAD trigger
and a Bell sound should be assigned to RIM trigger.
 Use the CY8 Trigger Type and increase the RIM GAIN to 5.0 and adjust from there.
Sens Thold Curve
8-10 2 Linear
8-10 2 Linear
8-10 2 Linear
8-10 2 Linear
12-14 0 Linear
8-10 2 Linear
©2004 All Rights Reserved. http://www.smartrigger.com
Rim Scan ReTrg
Gain Can.
1.0 2.0 6
0.8 1.6 6
0.8 1.6 6
1.0 2.0 8
1.1 2.0 8
1.0 2.0 6
SMARTRIGGER USERS GUIDE
Version 1.4
2/10/2010
Mask Xtalk
10 40
10 40
10 40
10 40
10 40
10 40
Mount
Cym
Cym
Cym
Cym
Cym
Cym