Registering A Song Location-Marker Create - Roland SI-24 Owner's Manual

Controlling Logic RPC Pro
Registering a song location—Marker Create
Logic RPC Pro has a Marker Create function that lets you assign a marker at the
desired location in a song.
Here's how to control Logic RPC Pro's Marker Create function from the SI-24.
Assigning a marker
1. Press [MARKER] to turn it on (lit).
2. Move to the location that you want to register, and press the marker request
button [0].
You may do this while the song is recording, playing, or stopped.
Markers will be registered to [1]–[9] in playback order. Registered buttons will be lit.
About marker registration
The markers are registered to the nine buttons [1]–[9] in the order of playback. This
means that if you assign a new marker at a location that is earlier than a previously
assigned marker, subsequent markers will be renumbered upward.
fig.4-1
Marker1 Marker2
Marker1 Marker2
Moving to a marker location
1. Press [MARKER] to turn it on (lit).
2. Press a lit [1]–[9] button to move to the registered location.
Erasing a marker
1. Press [MARKER] to turn it on (lit).
2. Of the lit [1]–[9] buttons, press the button for the marker that you want to erase.
3. Hold down [SHIFT] and press [0].
The registration will be erased, and the button will go dark.
36
Marker3 Marker4
Marker3 Marker4 Marker5
Time
Time