Ø
Take down the module panel on the Switch
Ø
Push module into Switch along the track smoothly
Ø
Screw the module on Switch
Ø
Plug fiber/UTP into the module, turn on the power supply of the
Switch. Without any configuration manually, the Module can work.
6. Remarks
Ø
There are led indicators on the module to show the working
condition. as follows
TX
RX
Link/Act
Link/Act
100M
FDX/Col
FIBER MODULE
UTP MODULE
Ø
TL-SM201 module support plug and play ,but must turn off power
supply before install/uninstall.
Ø
TL-SM201 module only install in the TP-LINK Switch, do not install
this card in any other brand Switch.
Ø
At present. TL-SM201 module can install in TL-SF2109P, TL-
SF2117P , TL-SF2226P+, TL-SL2226P, TL-SL2226P+ and TL-
SL3226P Switches , we will give a indication in the user's guide
when a new Switch could use this card. See our web site for more
details:
http://www.tp-link.com.
Warning
In order to avoid ESD, do not touch the parts on the circuit including
4
IC's pins with your hand directly!
7.
Working Environment
Power supply: supplied by Switch
Operating Temperature: 0 -40
Storage Temperature: -40 -70
Operating Humidity: 10%-90%(non-condensing)
Storage Humidity: 5%-95%(non-condensing)
Appendix: Contact Information
For help with the installation or operation of the TP-LINK TL-SM201
Series Module, please contact us.
TP-LINK TECHNOLOGIES CO., LTD.
Add: Fl.3, Bldg.R1-B, High-Tech Industrial Park, Shennan Road,
Shenzhen, China
E-mail: support@tp-link.com
Website: http://www.tp-link.com
Made in China
5
User's Guide
TL-SM201 Series Module