Other Settings; Procedure - Roland KR107 Owner's Manual

Chapter 9 Various Settings
Parameter Name
Measures
Specify the length (number of
measures) of the count-in.
Repeat
When "Repeat" is turned ON
on the Marker screen (p. 87)
this specified whether the
count-in will sound each time
the range between the
markers is repeated, or only
the first time.
142
Value
1, 2
First, Every

Other Settings

You can change the tuning, the language shown on the
display, and other settings to make the KR easier to use.

■ Procedure

1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Press the [Option] button.
A "Functions screen" like the following appears.
fig.d-funcmenu2.eps_50
When you press the [Option] button on the Basic screen,
the first page displayed shows the parameters for the
Automatic Accompaniment settings (p. 138).
Parameter
Tuning Changing the tuning methods.
Assigns functions to the pedal and
Pedal
Setting performance pad (p. 144).
Sets the KR's standard pitch (p. 146).
Master Tune
Selects the content to be shown on the
External Display
connected external display (p. 158).
Selects the language used in the
Language
display (p. 147).
User Image Selects the image data and display
Display used (p. 147).
Opening Sets the message that appears when
Message the power is turned on (p. 148).
MIDI Setting Refer to p. 161.
Program
Refer to p. 161.
Change
Stores edited settings and other data to
Memory Backup
the KR (p. 148).
MIDI Ensemble Refer to p. 161.
Restores the content stored with
Factory Reset Memory Backup to the original factory
settings (p. 149).
V-LINK Refer to p. 159.
Changing the functions of the remote
Remote Control
control's buttons (p. 149).
Refer to p. 166.
USB Driver
Sets the remote sensor's on or off (p.
Remote Sensor
150)
Allows for calibration of the touch
Touch Screen
screen (p. 150).
Explanation