Connecting Recording Equipment - Roland Cakewalk VS-700R Owner's Manual

Usb audio interface
Table of Contents

Advertisement

Connecting Recording Equipment

Connections to the Analog Jacks
fig.VS-700-rec01-mic-e.eps
Connecting a Mic
VS-700R Rear Panel
The eight audio inputs (INPUT 1–8) contain phantom power supplies. From SONAR's
"Tools" menu, open "VS-700" and select the "MIC PRE" tab, and click
make settings. When the system is powered up, the phantom power will be turned off.
When you load a project in SONAR, the state that is saved in the project will be reflected.
When using a condenser mic that requires a balanced (XLR) connection that
supplies phantom power, set
When using a dynamic mic etc. that has a phone plug, set
(PHANTOM OFF).
You must leave the phantom power turned off unless you've connected a condenser mic that
requires a phantom power supply. Supplying phantom power to a dynamic mic or audio playback
device will cause malfunctions. For details on the specifications of your mic, refer to the owner's
manual for your mic.
VS-700C Front Panel
For a mic,
select the "NORMAL" setting.
Connecting Synthesizers or Audio Equipment
VS-700R Rear Panel
If you want to connect equipment such as a synthesizer or effects processor, use
audio cables to connect the output connectors of such devices to the VS-700R's
INPUT jacks (1, 2).
Connecting a Guitar or Bass
If you want to connect a guitar or bass directly, connect it to the
AUX IN jack located on the front panel of the VS-700C console.
For a guitar or bass,
select the "Hi-Z" setting.
When connection cables with resistors are used, the volume level of equipment connected to the inputs
(INPUT 1–8 jacks, AUX IN Jack) may be low. If this happens, use connection cables that do not contain resistors.
16
[+48] button to
[+48]
button ON (PHANTOM ON).
[+48]
button OFF
VS-700C Front Panel
The VS-700R provides a balanced (XLR) type connector that
is wired as shown in the illustration. Check the wiring of
your device before connecting it.
Use this to adjust the recording
level.
Use this to adjust the recording
level.
Mics with
balanced (XLR) plugs
Mics with phone plugs
Mics with phone plugs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cakewalk sonar v-studio i/o

Table of Contents