Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
Thank you, and congratulations on your choice of the Roland TDA-700 V-Drums amplifier.
Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS"
(page 2), "USING THE UNIT SAFELY" (page 3-5), and "IMPORTANT NOTES" (page 6). These
sections provide important information concerning the proper operation of the unit. Additionally, in
order to feel assured that you have gained a good grasp of every feature provided by your new unit,
Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a
convenient reference.
Contents
IMPORTANT SAFETY INSTRUCTIONS .......................2
USING THE UNIT SAFELY ........................................3
IMPORTANT NOTES ...............................................6
Introduction ..........................................................7
Main Features ...........................................................................................7
Panel Descriptions.................................................8
Front Panel................................................................................................8
Rear Panel ...............................................................................................10
Connect your TDA-700 ........................................11
Switching the power on or off .............................................................11
Volume settings when using V-Drums sound module....................12
Stereo Link ..............................................................................................14
Proper Use of the Casters ....................................16
Appendices .........................................................17
Block Diagram........................................................................................17
Specifications ..........................................................................................18
Copyright © 2002 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Advertisement
Table of Contents
Related Manuals for Roland TDA-700
Summary of Contents for Roland TDA-700
-
Page 1: Table Of Contents
OWNER’S MANUAL Thank you, and congratulations on your choice of the Roland TDA-700 V-Drums amplifier. Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (page 2), “USING THE UNIT SAFELY” (page 3–5), and “IMPORTANT NOTES” (page 6). These sections provide important information concerning the proper operation of the unit. -
Page 2: Important Safety Instructions
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. -
Page 3: Using The Unit Safely
• Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. - Page 4 (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. • Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.
- Page 5 • To avoid injury, avoid placing hands at points indicated by the arrows in the following figure. fig.01 • Wrap the AC cord around the cord hook when trans- porting or storing the unit. fig.02 • In order to obtain optimum performance from this equipment, avoid allowing the areas indicated by the arrows in the figure below to become obstructed.
-
Page 6: Important Notes
IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 5, please read and observe the following: Power Supply • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). -
Page 7: Introduction
Together, they allow you to increase the impact of the V-Drums sound. Built-in 3-Channel Mixer Feature Thanks to its Mixer feature, the TDA-700 makes it easy to incorporate a variety of other devices, such as percussion pads and rhythm machines, in addition to V-Drums. -
Page 8: Panel Descriptions
This is effective in preventing the loop noise that may occur at times such as when the input (Channel 2 or 3) and Line Out on the TDA-700 are both connected to a mixer. B: Output is through the headphones, the internal speakers, and Line Out. -
Page 9: Power Switch
MASTER CONTROL ... 6. EQUALIZER The TDA-700 comes with a three-band equalizer. BASS Knob This adjusts the tone of the bass range. MIDDLE Knob This adjusts the tone of the middle range. TREBLE Knob This adjusts the tone of the treble range. -
Page 10: Rear Panel
STEREO LINK OUT jack to the other TDA-700. 15. STEREO LINK IN Jack Connect this jack to the STEREO LINK OUT jack on the main unit (the other TDA-700) when a true stereo output is required. Left-channel input signals are output from the internal speakers. -
Page 11: Connect Your Tda-700
Connect your TDA-700 Refer to the following diagram and connect the TDA-700 to the external equipment you are using. fig.30-1 (Rear Panel) Mixer * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. -
Page 12: Volume Settings When Using V-Drums Sound Module
Connect your TDA-700 Volume settings when using V-Drums sound module For best possible sound quality, set the volume of the V-Drums sound module and TDA-700 as follows. When PHONES on the V-Drums sound generator is connected to the TDA-700’s V-DRUMS IN , set the V- Drums generator’s PHONES VOLUME to the center... - Page 13 Adjust the direction of TDA-700 to suit the environment in which you are using it. When using TDA-700 as a personal monitor ......
-
Page 14: Stereo Link
Connect your TDA-700 Stereo Link Stereo playback is enabled simply by connecting two TDA-700 units with a single audio cable (phone type). This function is called “Stereo Link.” As the channel control section is designed to accept stereo signals, connection of sound sources is needed only at the main unit, thus enabling channel volumes to be centrally controlled on the main unit. - Page 15 The following shows the placement of V-Drums KIT and the TDA-700 in a Stereo Link configuration. When using TDA-700 as a personal monitor ......
-
Page 16: Proper Use Of The Casters
You can attach or remove the casters as shown in the following figure. Be sure to remove all the casters when accidental movement may be dangerous, such as when setting up the TDA-700 on stage, or when transporting it in a vehicle. -
Page 17: Appendices
Appendices Block Diagram fig.50 LINK IN CH1 / V-DRUMS CH 1 VR CH 2 CH 2 VR OUTPUT SEL CH 3 OUTPUT SEL CH 3 VR V-DRUMS EQUALIZER SHAPE MIXER LINK OUT POWER AMP MASTER TWEETER WOOFER POWER AMP LINE OUT PHONES... -
Page 18: Specifications
Appendices Specifications Rated Power Output 300 W (LF 240 W + HF 60 W) Nominal Input Level (1 kHz) CHANNEL INPUT (CH1–CH3): -20 dBu STEREO LINK INPUT: +4 dBu Nominal Output Level (1 kHz) LINE OUT: +4 dBu (XLR type, Phone type) STEREO LINK OUTPUT: +4 dBu * 0 dBu = 0.775 Vrms Speakers... - Page 19 This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 20 xxxxxxxx ’00-xx-xx-xxx...