Table of Contents
Advertisement
BASS & PERC EDIT
Here you can make settings for the Bass and Percussion parts.
✍
Parameter
Level
Pan
Dry Send
Ambience Send
Coarse Tune
Fine Tune
Octave
Bend Range
92
To access this screen, hold down the [SHIFT] button and press the [BASS] or [PERC] button.
Value
0–127
L64–0–63R
0–127
0–127
-12–+12
-50–+50
-3–+3
0–12
Description
Specifi es the volume of the tone.
Specifi es the pan. "L64" is far left, "0" is center, and "63R" is far right.
Specifi es the volume of the part.
Specifi es the level of the signal sent to the ambience.
Adjusts the pitch up or down in semitone steps (+/-1 octave).
Adjusts the pitch up or down in 1-cent steps (+/-50 cents).
One cent is 1/100th of a semitone.
Adjusts the pitch of the sound up or down in units of an octave (+/-3
octaves).
Specifi es the degree of pitch change in semitones when the Pitch Bend
lever is all the way right/left. For example, if this parameter is set to "12, " the
pitch will rise one octave when the pitch bend lever is moved to the right-
most position.
Advertisement
Table of Contents
