Registration Parameters; Registration Edit; Regist Control - Roland VP-770 Owner's Manual

Registration Parameters

This section explains the functions the diff erent registration parameters have, as well as the composition of
these parameters. For details on how to make settings, refer to "Editing a Registration" (p. 82).

REGISTRATION EDIT

These settings apply to the entire registration.
Parameter Value
Split ON, OFF
Split Point 36 (C2)–84 (C6)
Hold Freeze Part OFF, VOC, ENS
Ambience Type OFF
HALL1
HALL2
STUDIO
Ambience Depth 0–127
Direct Mic Level 0–127
Direct Mic Amb Send 0–127

REGIST CONTROL

Here you can make controller settings for the registration.
✍
In the REGISTRATION EDIT screen, you can press the [F1] (CONTROL) button to access the REGIST
CONTROL (Registration Control setting) screen.
REGIST KEYBOARD
Parameter Value
Aft Assign
OFF
MOD
DYN1
DYN2
FILTER
WAH
BEND-DOWN
BEND-UP
Aft Part
VOC/ENS
VOC
ENS
OFF
Description
Turns on the Split function, which divides the keyboard into separate zones
for the Vocal Designer and Ensemble parts.
Specifi es the key at which the keyboard is to be divided into separate zones
for the Vocal Designer and Ensemble parts.
The specifi ed part will not receive note-on messages when the Hold pedal
is pressed.
Turns the ambience off .
The reverberation of a church.
The reverberation of a large hall.
The reverberation of a studio.
Adjusts the depth of ambience.
Specifi es the direct microphone volume (the audio signal selected by the
Input Source (p. 86) setting).
Specifi es the level of the signal that is sent from the direct microphone (the
audio signal selected by the Input Source (p. 86) setting) to Ambience.
Description
Specifi es the aftertouch eff ect.
Off
Applies modulation.
Changes the volume. Transmits MIDI message CC#2 (breath control) to the
sound generator section. This is the same operation as Voice Expression
(p. 66), and will operate only in the positive (+) direction to increase the
volume.
Changes the volume. Transmits MIDI message CC#4 (foot control) to the
sound generator section. For STRINGS and BRASS sounds, this allows the
volume to be controlled in the ± directions (it will not go to zero). For other
sounds, the volume can be controlled only in the "+" direction.
Changes the tone.
Applies a wah eff ect to sounds that support Wah.
Lowers the pitch.
Raises the pitch.
Specifi es the part(s) that will be controlled by aftertouch.
Vocal Designer part and Ensemble Part.
Vocal Designer part only.
Ensemble part only.
Off
83