System Settings - Roland VR-700 Owner's Manual

System Settings

With the Group already selected, press the [+] button or [–] button until
* Settings for parameters other than Key Transpose are saved in system memory. After editing these, press the [WRITE] button to save the
settings in system memory (p. 51).
* The Key Transpose setting is saved separately for each favorite.
Button
[PIANO]
[E.PIANO]
[STRINGS]
[CHOIR/SCAT]
[BRASS]
[SYNTH LEAD]
[SYNTH PAD]
[GUITAR]
[BASS]
* The shaded parameters are stored in system memory.
About master tune
This adjusts the basic pitch of the entire VR-700. The display will show the numerical value of the reference pitch (Hz) with
the 100's place omitted. For example, if the display indicates "38.5," the reference pitch is 438.5 (Hz).
USB Driver
Specifies the USB driver to use when you connect your computer via the USB MIDI connector. Leave the USB Driver at the
"Generic" setting. If you change this to "Original," you'll need dedicated drive software in order to connect the VR-700 to
your computer. For more about the dedicated driver software, refer to the Roland website.
Roland website: http://www.roland.com/
USB Memory Mode
In certain cases, data reading may be slow or unsuccessful when you connect USB memory to the USB MEMORY connector.
If so, you may be able to solve the problem by switching this setting.
Parameter
Master Tune
Key Transpose
Key Touch
Key Touch Velocity
Specifies the strength of the notes when Key
Touch is turned OFF.
Quick Firing
Enables the Quick Firing function for the organ.
Turning this OFF will make the keyboard less
responsive for glissandi or repeated notes, but
will reduce rebounding (bouncing) when you
release a key.
Clock Source
Clock Out
USB Driver
USB Memory Mode
is shown in the display.
Value
415.3–466.2 (Hz)
-6–5 (semitone)
Notes will sound at a
fixed loudness regardless
of how strongly you play
Lighter-feeling keyboard
touch
Normal
Heavier-feeling
keyboard touch
1–127
OFF, ON
Internal clock
MIDI clock
OFF, ON
Use the computer's
standard driver (Generic)
Use the dedicated driver
software (Original)
-1-, -2-
Various Settings (Function mode)
Factory setting
440.0 (Hz)
–
Normal
100
ON
Internal clock
OFF
Generic
-2-
59