Listening To The Demo Songs; Restoring The Prelude To Its Factory Settings; Preserving Certain Settings Even When You Switch Performances (Lock System) - Roland Prelude Owner's Manual

Listening to the Demo Songs

1. Press [MENU].
2. Use [ ] [ ] to select "Demo Play" then press [ENTER].
3. Use the cursor buttons to select the song you want to hear
then press [ENTER].
Press [PIANO (0)] to play back all of the demo songs.
4. Press [START/STOP] to stop demo playback.
5. Press [EXIT] to return to the Main screen.
All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
No data for the music that is played will be output from MIDI
OUT.
Restoring the Prelude to Its
Factory Settings
You can return all of Prelude's settings to the factory-set state.
This is called "Factory Reset."
If the Prelude's internal memory already contains important
data that you've created, all of this data will be lost when you
execute a Factory Reset. If you want to keep your data, you
must save it to USB memory (p. 48).
1. Press [MENU].
2. Use [ ] [ ] to select "Utility" then press [ENTER].
3. Use the cursor buttons to select "Factory Reset" then press
[ENTER].
The confirmation message will appear.
4. Press [ENTER] to execute the Factory Reset.
If you press [EXIT] instead, you're returned to the previous
screen and no Factory Reset takes place.
5. Turn the power off and then on again.
Restoring the factory settings will initialize the System and User
Performance settings.
Preserving Certain Settings
Even When You Switch
Performances (Lock System)
The settings for which you select "ON" (as described below)
will not change even when you switch Performances.
Choosing the settings that will be locked
1. Press the [MENU] button and select "System".
2. Confirm your choice by pressing [ENTER].
3. Press the [ ] button several times until the "System
Lock" page is displayed.
4. Use [ ] [ ] to select the parameter, and turn the
VALUE dial to select the value.
Parameter Explanation
The Style will not change when you
Style
switch Performances.
The Tones will not change when you
Tone
switch Performances.
The Style tempo will not change
Style Tempo
when you switch Performances.
The transpose setting (p. 21) will not
Transpose change when you switch
Performances.
5. Press [EXIT].
You will see the message "System Write Completed."
These settings are system parameters (p. 45).
Introduction
Value
OFF, ON
OFF, ON
OFF, ON
OFF, ON
17