Diagnostic Software, To Read Warning History ( Pcgce Ver.8 ) - Mitsubishi SL1U Service Manual

DIAGNOSTIC SOFTWARE, TO READ WARNING HISTORY ( PCGCe Ver.8 )

1. Preparation
PCGC8 supports Microsoft
with Windows ® 95/98 installed.
1. Copy the folder named "Pcgc8(English)" in the CD-ROM
onto the desktop.
2. Connect the PC with the projector by attaching the RS-
232C cable.
3. Click "Pcgc8e.exe" in the folder named "Pcgc8
(English)".
2. Operation
(1) Model name selection dialog window
Starting Pcgc8 displays the model name selection dialog
window. Select the model name you want to use and press
the OK button to display the main dialog window. Press the
Cancel button to exit the application.
The list of the available model names is displayed.
Select one model name you want to use.
Select "XL1U" when
using "XL1U" or
"SL1U" when using
"SL1U".
Goes to the main
dialog window.
Model name selection dialog window
Displays the information about the connected device.
The contents depend on the selected model.
Displays the selected
model name.
Displays the
Warning Status.
® Windows ® 95/98. Use a PC
Exits this application.
Displays the
Warning History 1.
Main dialogue window
(2) Main dialog window
1. The main dialog window displays the information stored
in the projector (model name, serial No., software
version, etc.) and the service menu information.
Information displayed in this window depends on the
selected models.
2. Some PCs may not be able to connect to the right COM
port. In such cases, press the Change COM PORT
button to switch the COM port. Refer to (4) Switching
the COM port.
3. Press any of the Warning Status, Warning History 1,
Warning History 2, or Warning History 3 button to
display the warning dialog window containing the
detailed error data.
4. Press the DIAGNOSIS button to start self-diagnosis.
(Not available during power on and when an error
occurs.)
Warning Status : The current warning status is displayed.
Warning History 1: The latest warning history data are stored
Warning History 2: The second oldest warning history data
Warning History 3: The oldest warning history data stored in
Note: When the power is turned off because of any error,
the warning history data are saved. Or, only when an
error occurs during power on or when an error is
detected during self-diagnosis (or immediately after
pressing the DIAGNOSIS button), the warning history
data are saved. (The warning history data aren't
Displays the current date and time
when the error is corrected.
DIAGNOSIS
Displays the Displays the
Warning History 2. Warning History 3.
- 3 -
The data will disappear after the error is
corrected.
in the Warning History 1. The data
remains after the error is corrected.
are stored in the Warning History 2.
the Warning History 3.
Switches the COM
port.
Starts self-diagnosis.
Exits the application.