Adjusting The Volume (Master Gain); Changing How Grand Space Is Applied (3D Mode); Changing The Parts Assigned To The Track Buttons During Smf Playback (Track Assign); Switching On/Off The Display Of Lyrics (Lyrics) - Roland LX-10 Owner's Manual

Various Settings

Adjusting the Volume (Master Gain)

If you are playing the LX-10 through a connected external
system, there may be cases in which the volume from your
external system is too low even when the LX-10's [Volume] knob
is turned to the maximum setting. In such cases, you can adjust
the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
NOTE
excessively.
-12–0–12 dB
Changing How Grand Space is Applied
(3D Mode)
This specifies how 3D Sound Control (p. 33) will be applied.
Setting
When the headphones are connected, the
depth effect is optimized for headphones,
Auto
and when no headphones are connected,
the optimal depth for speakers is applied.
The optimal depth for speakers is used,
regardless of whether or not headphones
are connected.
3D sound control is also applied to the
Speaker
sound output from the Output connectors,
making this convenient when you want to
play through speakers connected to the
Output connectors.
The optimal depth for headphones is used,
Headphones regardless of whether or not headphones
are connected.
88
Setting
Description
Changing the Parts Assigned to the
Track Buttons During SMF Playback

(Track Assign)

Ordinarily, when playing back SMF music files for Roland Piano
Digital instruments (p. 110), the left-hand part is assigned to the
Track [Left] button, and the right-hand part is assigned to the
Track [Right] button. However, right-hand and left-hand part
assignments in certain SMF music files may differ.
If these are set to "Auto," and as a result you are unable to use the
track buttons to control the left- and right-hand parts (p. 54)
properly, change the setting to "2/1 Part" or "3/4 Part."
This setting can be used for SMF format songs other
NOTE
than the internal preset songs. It will not affect internal
preset songs.
Setting
The part assigned to each track will be
Auto determined automatically, depending on
the song file.
Assigns Part 1 to the [Right] button, Part 2 to
2/1 Part the [Left] button, and the remaining parts to
the [Accomp] button.
Assigns Part 4 to the [Right] button, Part 3 to
3/4 Part the [Left] button, and the remaining parts to
the [Accomp] button.
After changing this setting, try selecting the song once
NOTE
again.
Switching On/Off the Display of Lyrics

(Lyrics)

This lets you specify whether lyrics will be displayed in the screen
when you play back song data that contains lyrics.
Setting
On Lyrics will be displayed.
Off Lyrics will not be displayed.
This is set to "On" at the factory.
Description
Description