Roland LX-10 Owner's Manual page 64

Recording
3.
Press the [
The [
standby mode.
If you decide not to record, press the [
The button of the track to be recorded will flash.
4.
Press the button of each track you don't want to record, turning off its
illumination.
You can record to only one track button at a time.
Recording
5.
Press the [
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [
case, a count is not sounded.
When recording begins, the [
During the count-in, the count measure is indicated in the lower right of the display as "-2" then "-1."
6.
To stop recording, press the [
Recording an Additional Part
7.
In the song select screen, press the [
You will return to the beginning of the recorded performance.
8.
Press the [
The following screen appears.
fig.d-OverRec.eps
If you want to erase the previously recorded performance and re-record a new performance, press the
[
9.
If you want to record another track, press the [
The following screen appears.
fig.d-OverRec2.eps
64
] button.
] button will light, the [
] button.
] button and [
] button.
] button.
] button indicator will flash, and the LX-10 will enter recording
] button once again.
] button will light.
] button.
] button.
] button). In this
] button.