Roland JUNO-D Owner's Manual page 76

Adding effects
Parameter Value
Low Gain -15– +15 [dB]
High Gain -15– +15 [dB]
Balance # D100:0W–
D0:100W
Level 0–127
20: 3 TAP DELAY (Triple Tap Delay)
The Triple Tap Delay produces three delay sounds; center, left and
right.
fig.MFX-20
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
Parameter Value
Delay Left 0–840 [ms],
note *1
Delay Right 0–840 [ms],
note *1
Delay Center 0–840 [ms],
note *1
Feedback # -98– +98 [%]
HF Damp 200–8000 [Hz],
BYPASS
Left Level 0–127
Right Level 0–127
Center Level 0–127
Low Gain -15– +15 [dB]
High Gain -15– +15 [dB]
76
Description
Adjusts the gain of the low fre-
quency.
Adjusts the gain of the high fre-
quency.
Adjusts the volume balance be-
tween the direct sound and the
modulation delay sound.
With a setting of D100:0W only
the direct sound will be output,
and with a setting of D0:100W
only the modulation delay
sound will be output.
Adjusts the output level.
Balance D
2-Band
L out
EQ
Balance W
Center Tap
Balance W
2-Band
R out
EQ
Balance D
Description
Adjusts the time delay from the
direct sound until when the left
delay sound is heard.
Adjusts the time delay from the
direct sound until when the
right delay sound is heard.
Adjusts the time delay from the
direct sound until when the cen-
ter delay sound is heard.
Adjusts the proportion (%) of
the delay sound that is fed back
into the effect.
Negative (-) settings will invert
the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
If you do not want to cut the
high frequencies of the feed-
back, set this parameter to BY-
PASS.
Adjusts the volume of the left
delay sound.
Adjusts the volume of the right
delay sound.
Adjusts the volume of the center
delay sound.
Adjusts the gain of the low fre-
quency.
Adjusts the gain of the high fre-
quency.
Parameter Value
Balance # D100:0W–
D0:100W
Level 0–127
21: 4 TAP DELAY (Quadruple Tap
Delay)
The Quadruple Tap Delay has four delays.
fig.MFX-21a
L in
Delay 1
Feedback
Quadruple Tap Delay
Delay 4
R in
The stereo location of each delay sound is as follows.
fig.MFX-21b
2 3
1 4
R
L
Parameter Value
Delay 1 0–840 [ms],
note *1
Delay 2 0–840 [ms],
note *1
Delay 3 0–840 [ms],
note *1
Delay 4 0–840 [ms],
note *1
Level 1 0–127
Level 2 0–127
Level 3 0–127
Level 4 0–127
Feedback # -98– +98 [%]
Description
Adjusts the volume balance be-
tween the direct sound and the
delay sound.
With a setting of D100:0W only the
direct sound will be output, and
with a setting of D0:100W only the
delay sound will be output.
Adjusts the output level.
Balance D
L out
Balance W
Delay 2
Delay 3
Balance W
R out
Balance D
Description
Adjusts the time delay from the
direct sound until when delay 1
sound is heard.
Adjusts the time delay from the
direct sound until when delay 2
sound is heard.
Adjusts the time delay from the
direct sound until when delay 3
sound is heard.
Adjusts the time delay from the
direct sound until when delay 4
sound is heard.
Adjusts the volume of delay 1
sound.
Adjusts the volume of delay 2
sound.
Adjusts the volume of delay 3
sound.
Adjusts the volume of delay 4
sound.
Adjusts the proportion (%) of
the delay sound that is fed back
into the effect.
Negative (-) settings will invert
the phase.