Table of Contents
Advertisement
5.
Press the
applied.
Setting
Off
1–10
6.
Press the [
] button to close the "Effect" screen.
■ Adjusting the Brightness of the Sound (Brilliance)
You can adjust the brightness of the sound.
1.
Press the [Menu/Lesson] button.
The Menu screen appears.
2.
Press the
button.
3.
Press the
button.
4.
Press the
fig.d-SoundAdjust-e
5.
Press the
Setting
-10–0–10
"0" is the standard brightness.
Values below 0 will produce a more mellow sound. Values above 0 will make the
sound brighter.
6.
Press the [
] button to close the "Tone Control" screen.
cursor up or down button to adjust the amount of chorus
Explanation
No chorus effect is applied.
The chorus effect is applied.
The effect deepens as the value is increased.
cursor button to select <Functions>, then press the [
cursor button to select <Tone Control>, then press the [
cursor left button to select <Brilliance>.
cursor up or down button to change the brightness setting.
Adding Variety to Your Performances
The chorus setting can be
memorized for each tone.
Turning off the power restores
the original settings.
You can also use the Memory
Backup function to save the
chorus settings even when the
power is turned off(p. 97).
]
]
55
Advertisement
Table of Contents
