Download Print this page

Viking VK1218 UL Instructions

12x18w 6 in 1 led battery / mains uplighter

Advertisement

Quick Links

Viking VK1218 UL
12x18w 6 in 1
Led Battery /
Mains Uplighter
Instructions
This Led light is designed to create washes, either mains or battery powered,
together with DMX or stand alone control, either wired or wireless using the built
in 2.4g Wireless DMX Receiver
It uses 12 x 6 in 1 Led for RGBWA & UV for colour mixing, with powercon in
and out for mains operation if required. In addition the unit has a fuel gauge led
display to show the charge status of the battery together with a power saving switch
to turn off the DMX wireless receiver if using cables.
In normal use the unit will need a 6 hour charge for full battery capacity which will
provide up to 20 hours use if using one colour or 12 hours using 2 colours or 6
hours using full colour.
Display
Value
Function
A001
1-512
DMX Address of unit in 10 channel mode
D001
1-512
DMX Address of unit in 6 channel mode
CC01
01-99
Snap Colour Changing Slow to Fast
EE01
00-99
Colour Fade Change Gradual Slow to fast
FF01
01-99
Colour Fade with Blackout between colours Slow to Fast
dEdF
Sound to Light
r000
0-255
Manual Red Led Brightness
G000
0-255
Manual Green Led Brightness
Manual Blue Led Brightness
b000
0-255
Manual White Led Brightness
o000
0-50
Manual Amber Led Brightness
Y000
0-255
Manual UV Led Brightness
P000
0-255
10 Channel Mode (address on unit showing ie; A120
Channel
Value
Function
1
0-255
Master Dimmer Dark to Bright
Strobe - Slow to Fast
2
0-255
0-50
Function: DMX Control on 9 Channels
51-100
Auto Control: Snap Between Colours
3
101-150
Auto Control: Gradual Fade Between Colours
151-200
Auto Control: Pulse Change Between Colours
201-255
Auto Control: Sound To Light Change Between Colours
4
0-255
Program Speed from Slow to Fast
0-255
Red LED from Dark to Bright
5
6
0-255
Green LED from Dark to Bright
7
0-255
Blue LED from Dark to Bright
0-255
White LED from Dark to Bright
8
9
0-255
Amber LED from Dark to Bright
10
0-255
UV Led
Charging:
To charge the unit, turn off the Power switch & also the Signal switch. Plug the unit
into the mains on either the Powercon socket on the unit or via the charge lead in the
flightcase. A full charge from empty is normally achieved in approx 6 hours. The
unit can be used at any time during the charge period.
Usage:
This unit is only for use Indoors. It is not suitable for use outside in the wet.
Mains Operation:
The unit can be used on Mains via the Powercon Blue Mains socket and linked
through to up to 13 other units on the Mains Out Powercon socket. This 'daisy
chaining' can also be used for charging.
Charge Indicator:
The 4 Led Charge Indicator shows the charge state of the unit.
All Led's on = Fully Charged
1 Red & 2 Green Leds on = above 75% charged
1 Red 1 Green Led on = above 50%
Red Led only = Charge required under 25% charge remaining
from Dark to Bright

Advertisement

loading

Summary of Contents for Viking VK1218 UL

  • Page 1 10 Channel Mode (address on unit showing ie; A120 Viking VK1218 UL Channel Value Function 12x18w 6 in 1 0-255 Master Dimmer Dark to Bright Led Battery / Strobe - Slow to Fast 0-255 0-50 Function: DMX Control on 9 Channels...
  • Page 2 Charging: 6 Channel Mode (address on unit showing ie; D120 To charge the unit, turn off the Power switch & also the Signal switch. Plug the unit Channel Value Function into the mains on either the Powercon socket on the unit or via the charge lead in the flightcase.