ITEM Item...........................02 1.Introduction.……....................03 2.Fixture size......................03 3.Parts Introduction....................04 4.Safety information....................05 5.Packing and shipping ..................07 6.AC power......................07 7.Lamp model and replacement................07 8.Colour and gobo description................09 9.Control panel Operation..................10 10.DMX Channels....................14 11.PCB Driving board....................23 STATEMENT This product is carefully checked prior to shipping from our warehouse. All users should strictly abide by the warnings and instructions stated in this manual, any damage and results due to misuse and the neglect of this operating manual are chargeable to the end user.
1. VK440 Super FLX Introduction Thank you for choosing the VK440 Super FLX. This model is the very latest development of the smart, efficient and powerful moving light products, combining advanced technology of today's stage lighting products with international advanced electronic control technology and excellent user-friendly industrial design , fully comply with CE standard, and international standard DMX512 signal mode.
4. SAFETY INFORMATION Safety warning message This product is only suitable for professional use, users are deemed familiar with moving light fixtures generally. After you got the lights, please check the package whether have any damage caused by transportation. If there is any damage, do not use this fixture, and please contact the dealer as soon as possible.
Page 6
TO PREVENT BURNING OR FIRE The fixture can be mounted directly on the surface of ordinary combustible material. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse. The equipment must be installed away from inflammable and explosive materials. The equipment should be at a projected range of 15 meters away objects and projectiles 5.
VK440 SuperFLX LAMP The lamp for this light is extremely expensive at over £300 and they last a long time and should not need user replacement – please call Viking BEFORE replacement for advice FIRST !!!!! LAMP MODEL POWER LIFE/HOUR...
Page 8
LAMP REPLACEMENT Attention! When replacing the lamp is important not to touch lamp with bare hands, to avoid greasy dirt stains on the filament which degrades performance and lamp life. Disconnect the power. Before replacing the lamp the fixture needs 20 minutes for lamp cooling. Fasten the head with Y axis protect lock in 60 °...
8.COLOR WHEEL,GOBO WHEEL BS440C color wheel with colors+CMY,pure colors,perfect effect; BS440C Static gobo wheel with 17gobos +white, Rich gobos; BS440C Rotate gobo wheel with 9gobos+white, smooth gobo rotation, replace easily; Two rotation prism, one 8 facet prism, one linear 4 prism, one fixed 16 prism, each two prism can combined using together.
9. CONTROL PANEL CONTROL TOUCH WHEEL SCREEN DISPLAY Touch screen display:Display the data information and control operation; Control wheel: can turn right,left and enter; Turn left: Data increasing, scroll menu; Turn right: Data diminishing, scroll menu; Enter: OK 9.2. CONTROL PANEL MENU OPERATE Function Main Menu Submenu 1...
Page 11
Pan/Tilt Scan Speed setting Slow slow Pan/Tilt Scan Speed setting Fast fast Pan Scan Angle setting 360 Pan Angle: Pan Scan Angle setting 540 Pan Scan Angle setting 630 keep signal data Singl Clear: clear signal data half color function Full Colour: full color function Shortcust off for colors and gobos...
Page 12
SAVE Save and back FacConfig EPRT for factory only back back Verify1: 0-255 need password Verify2: UNLOCK need password back ALL MOTER All step motor(do not adjust it ) Pan/Tilt step motor adjust(do not MOTER adjust it ) LAMP REST PART MOTER Other step motor( except Pan/Tilt)
Page 13
Back Back DMX VALUE CH00-CH32 0-255 DMX value number Colour: Rot Gobo: Static Gobo: Pan: Tilt: Gobo Rot: Prism: Right/Error For factory only REST INFO Beam: Prism Rot: Beam Rot: Zoom: Focus: Pan Opto: Tilt Opto: SYSTEM Back INFO Run Time: 0-9999 Machine runing hours How many time of the Machine...
Back ground light flash function off Light Flash: Back ground light flash function on Touch screen calibration on Touch Cali: Touch screen calibration off SAVE Save and back Back Lamp Lamp off Default: Lamp on Lamp off by manual Manual Lamp: lamp on by manual Lamp Time 0000-9999...
Page 15
Light Orange+Light Purple Light Purple Light Purple+Blue Blue Blue+Deep Blue Deep Blue Color 2 White White+Deep Red Deep Red Deep Red+Deep Green Deep Green Deep Green+Light Green Light Green Light Green+UV Blue UV Blue UV Blue+Deep Orange Deep Orange Color 3 0-255 0-255 Cyanine...
Page 17
116-123 Gobo8Shake 124-129 Gobo9Shake Gobo Shake rotation from slow to fast 130-137 Gobo1Shake 138-145 Gobo2Shake 146-153 Gobo3Shake 154-161 Gobo4Shake 162-169 Gobo5Shake 170-177 Gobo6Shake 178-185 Gobo7Shake 186-193 Gobo8Shake 194-199 Gobo9Shake 200-227 Rotation,Clockwise from fast to slow 228-229 Pause 230-255 Rotation Anti-clockwise from slow to fast Gobo Rotation If Rotation Gobo in position mode 0-255...
Page 18
Zoom 0-255 Linear Zoom 0-255 Zoom Fine 0-255 Focus 0-255 Focus Fine Strobe 0-31 Strobe Close 32-63 Strobe Open 64-95 Strobe from slow to fast 96-127 Strobe Open 128-143 From fast to slow,slow close fast open 144-159 From slow to fast,fast open slow close 160-191 Strobe Open 192-223...
Page 19
UV Blue+Deep Orange Deep Orange Color 3 0-255 Strobe Dimmer 0-31 Strobe Close 32-63 Strobe Open 64-95 Strobe from slow to fast 96-127 Strobe Open 128-143 From fast to slow,slow close fast open 144-159 From slow to fast,fast open slow close 160-191 Strobe Open 192-223...
Page 21
154-161 Gobo4Shake 162-169 Gobo5Shake 170-177 Gobo6Shake 178-185 Gobo7Shake 186-193 Gobo8Shake 194-199 Gobo9Shake 200-227 Rotation,Clockwise from fast to slow 228-229 Pause 230-255 Rotation Anti-clockwise from slow to fast Gobo Rotation If Rotation Gobo is in position mode 0-255 Index If Rotation Gobo is in rotation mode Pause 1-127 Rotation Anti-clockwise from fast to slow...
Page 22
0-255 Linear Focus Fine Beam effect( Empty) 0-255 0-255 Pan Fine 0-255 Tilt 0-255 Tilt Fine Function 0-255 Pan Tilt speed adjust Reset 0-25 No function 26-76 Small step motor Reset 77-127 Pan Tilt Reset 128-255 Whole light Reset Lamp control 0-25 No function 26-100...