Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Viking VK10 Vortex Moving Head
Summary of Contents for Viking VK10 Vortex Moving Head
-
Page 1: User Manual
VK10 VORTEX MOVING HEAD USER MANUAL Rev 2.01... -
Page 2: Safety Instructions
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITALLY START This device has left our premises in absolutely perfect condition. In order to maintain this condition & to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual. - Page 3 If the fixture has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. Do not shake the fixture. Avoid brute force when installing or operating the fixture. This fixture was designed for indoor use only;...
-
Page 4: Installation
2. Installation Fixtures must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. 2.1 Connection to the mains For protection from electric shock, the fixture must be earthed! The VK10 VORTEX is equipped with auto-switching power supply that automatically adjusts to any 50- 60Hz AC power source from 100-240 Volts. - Page 5 The fixture has to be installed out of the reach of the prying fingers of the public. Danger of fire ! When installing the device, make sure there is no highly inflammable material (decoration articles, etc.) in a distance of min. 1 m. CAUTION! Use 2 appropriate clamps to rig the fixture on the truss.
- Page 6 When installing fixtures side-by-side, avoid illuminating one fixture with another! DANGER TO LIFE! Before taking into operation for the first time, the installation has to be approved by an expert! Power supply connection The equipment can be used on a wide voltage input from 100 to 240v AC. Please make sure the voltage is in this scale when connecting the power.
- Page 7 VK10 VORTEX Product Overview VK10 VORTEX Specification ● XLR sockets input/output 3Pin ● Power input/output on Powercon 10a Connector ● 4 kinds of control model: DMX512, Artnet ,Sound Activated, Master/slave ● LCD display screen ● Display screen can be turned upside down 180°to fit the installation in different places ●...
- Page 8 ● Rated Power: 450W ● LED Qty: 19x15W high power 4 in 1 LEDs ● LED Drive Current: 1000mA ● IP Rating： IP20 Indoor or sheltered from Rain Only ● DMX Mode： 21CH（Standard）/ 35CH(Shapes) / 78CH(Extend) /96CH (Extend RGBW) /92CH (Full) ●...
- Page 9 ● When choosing Run， press ENTER & there are 7 options selected using the UP / DOWN cursor buttons as before; DMX512 Select for DMX 512 Via 3 pin XLR (DMX LED will flash if DMX is present) Artnet Select for ARTNET Via RJ45 (Artnet LED will flash if Artnet is present) Auto1 Select Auto1 program –...
- Page 10 4) Menu Map 5) Info [Check equipment information] Press MENU，until it shows【Info】，press ENTER. ● Press UP or DOWN to choose 【Time Info】、【Temp Info】、【Software Ver】。 ● When selecting【Time Info】，press ENTER，prerss UP or DOWN to choose【Power on】,【Ttl Life hrs】 ● or【Last Run Hrs】，If choosing 【Power on】，press ENTER to enter into the equipment“XXXX”hours。If selecting 【Ttl Life hrs】，press ENTER to enter into the equipment total operation time“XXXX”hours，If selecting 【Last Run Hrs】，press ENTER to show the LED’s last operation“XXXX”hours When selecting【Temp Info】，press ENTER to show【Head Temp】,and then press...
- Page 11 6) Custom Programs The VK10 Vortex can store 7 custom programmable programs, each with 10 scenes and individual head positions and, ● colours and fade times. Press MENU，until it shows 【Edit】，and then press ENTER. ● Press UP or DOWN to choose the program number to edit 【Pro01】-【Pro07】, and press ENTER，choose each ●...
-
Page 12: Dmx Protocol
9. DMX Protocol Full Shapes Extended Extended Channel Function Mode Value Mode RGBW Mode 0－255 0－255 Red Fine 0－255 Green 0－255 Green Fine 0－255 Blue 0－255 Blue Fine 0－255 White 0－255 White Fine 0－255 Linear CTO Filter 0－255 Macro Colour 0－255 Strobe 0－255... - Page 13 Shape Offset G Led 4 B Led 3 Shape Offset Foreground Strobe B Led 4 W Led 3 Foreground Strobe Background Strobe R Led 5 R Led 4 Background Strobe Background Select G Led 5 G Led 4 Background Select B Led 5 B Led 4 R Led 1...
- Page 14 W Led 16 85 G Led 17 R Led 17 B Led 17 G Led 17 R Led 18 B Led 17 G Led 18 W Led 17 89 B Led 18 R Led 18 R Led 19 G Led 18 G Led 19 B Led 18 B Led 19...