Programming - Honeywell CT1802 Owner's Manual

Programming

You can program your thermostat to
automatically lower and raise the temperature
one or more times every 24 hours.
Refer to the energy savings chart on the
back cover for typical heating and cooling
savings with your new thermostat.
Before setting your program:
Lift thermostat flip-up cover and you'll find
the 24-hour program dial. The slots on the
program dial (Fig. 4) are for the program pins,
which can be inserted at 10-minutes intervals.
Three red and three blue program pins are
included with your thermostat. The red pins start
the high-temperature period; the blue pins start
the low-temperature period. A heating program is
preprogrammed. A red pin is inserted at 6:00 AM
for high temperature (comfort period); a blue pin
is inserted at 10:00 PM for low temperature
(energy saving period).
24 HOUR PROGRAM DIAL
(GRAY AREA FOR NIGHT
SETTING)
PROGRAM
PIN SLOT
THERMOSTAT COVER
Fig. 4—Program components.
13
PROGRAM PINS FLIP-UP
COVER
PROGRAM
PROGRAM
INDEX WHEEL TIME
PIN
INDICATOR
STORAGE
ARROW
M9614
69-0395—2