Installation Procedure; Assembling The Lid; Installing The Lid Holders - Roland F-100 Owner's Manual

Assembling the Lid

NOTE
You must always use both hands to open or close the lid.
When opening and closing the lid, be very careful not to
catch your finger in the lid.
1.
Attach the included lid as shown in the diagram.
fig.00-04
Projection
2.
When opening the lid, grasp the lid with your
hands and gently lift it upwards.
3.
When closing the lid, grasp the lid with your
hands and gently lower it down.
NOTE
Make sure an adult is on hand to provide assistance when
young children are playing the F-100.
NOTE
When you move the piano, be sure to remove the lid to
prevent accidents. Be careful not to drop the removed lid.

■ Installing the Lid Holders

Attaching the supplied lid holders provides you with a place
to rest the lid whenever it's been removed.
Check the Parts
Lid Holders (left and right)

Installation Procedure

1.
1.Remove the four screws from both sides of the
rear panel of the F-100.
* Be careful not to lose the screws you've removed. You will
need to put them back in place at the rear of the F-100 if you
decide that you don't want to use the lid holders.
Remove the screws at both ends
Lid
Keyboard
Attachment screws (4)
2.
Attach the lid holders to the rear panel of the F-
100 using the supplied attachment screws (four
locations).
Placing the Lid
Rest the lid on the lid holders gently, as shown.
Align the ends of
Lid
the lid with the
corners of the lid holders
Lid Holder
NOTE
Never lean against, nor apply excessive force to the lid while
it is resting on the lid holders.
Before You Play
Lid Holder
Attachment
screws
11