Roland ep-90/70 Owner's Manual page 20

Try Recording Your Performance
4.
Use the [Beat] knob to select the time for the song.
The time of the song cannot be changed during or after recording.
fig.6-04
2 3
2 3
0 0
5.
Press the [Rec] button to turn on the indicator.
The keyboard is put in record standby mode.
The [Play] button's indicator flashes.
fig.6-05.e
Press
If you want to cancel the recording, then press the [Rec] button once more to make the
indicator dark.
If you wish to stop the metronome, press the [On/Off] button to make the indicator go
dark.
In the beginning it is probably a good idea to listen to the metronome as you record.
The sound of the metronome is not recorded.
6.
Recording will begin when you play a note on the keyboard.
The [Play] button indicator will change from blinking to lit.
Listen to the metronome, and play along with the tempo.
fig.6-06
Instead of playing the keyboard, you can also begin recording by pressing the [Play]
button to make the indicator light. In this case, you will hear a two-measure count before
recording begins.
7.
When you are finished recording, press the [Play] button to make
the indicator go dark.
fig.6-07.e
Press
20
Beat
4
4
6
6
Rec
Play
Rec
Lit
Play
Dark