Preparing An Sd Memory Card - Roland CD-2i Owner's Manual

Preparing an SD Memory Card

Here's how to prepare an SD memory card for recording.
Inserting an SD Memory Card
1
Insert the SD memory card into the SD card slot on the CD-2i's front
panel.
Printed surface
upward
Displayed screen
Audio source
Total number
of tracks
fig.SDcard01-e.eps
With the printed surface of the SD memory card
facing upward, insert the card until it clicks into
position.
* Carefully insert the SD memory card all the way in-
SD card slot
fig.SDcard02.eps
Status of the SD memory card
Nothing has been recorded yet.
A song has been recorded.
* If the SD memory card has already been recorded, the
total number of songs and the total playback time will
be displayed when the SD memory card information is
Total playback time
loaded.
This SD memory card cannot be used by the CD-2i in its
current state.
* If this message is shown, you'll need to format the card
before using it with the CD-2i. For details, refer to the
section on the following page entitled "If the screen
indicates 'Not CD-2i Format'."
until it is firmly in place. Forcing it in the wrong
way may damage the CD-2i or the SD memory
card.
25