Troubleshooting
If you suspect a malfunction, please check the following points.
If this does not resolve the problem, contact a nearby Roland distributor.
Power Supply
Problem
The power does not turn
on when you press the
[POWER] button.
Screen
Problem
The screen is difficult to
read
The screen goes dark
Unreadable characters
appear on the screen
128
●
Could you be using an AC adaptor other than the included one?
➔
Use included dedicated AC adaptor.
●
Could the AC adaptor plug have been disconnected from the CD-2i's
AC adaptor jack?
Could the power cord have been disconnected from the AC outlet or
the dedicated AC adaptor's connector?
➔
Firmly reconnect the dedicated AC adaptor and power cord.
●
Could the remaining battery power be insufficient?
➔
Once the battery runs low, the power may not turn on. Install fresh
batteries.
●
Are the batteries installed in the correct orientation?
➔
Check the "
" and "
correctly.
●
Depending on the location or environment in which the CD-2i is
placed, the screen may be difficult to read.
➔
Readjust the display contrast.
●
If you're using batteries, the Backlight Timer setting will dim the
screen when you haven't operated the CD-2i for a specified length of
time.
➔
Turn the Backlight Timer "Off."
●
Could you have specified the wrong screen display language?
➔
Select the appropriate screen display language.
Cause and Action
" orientation of the batteries, and install them
Cause and Action
See
Page
21
21
24
23
See
Page
118
119
120