Controlling The Projector Using Pjlink Application - Canon LX-MU500Z User Manual

• Info page
The info page displays the information and status of this projector.
i. The information you entered in the Tools page will display here and these columns are
empty when you use e-Control
ii. When the projector is in abnormal conditions, the following information will display.
When the projector is in normal conditions or in any abnormal conditions other than the ones
mentioned below, the Error Status column will be "0:No Error".
Error Status
3: Light source fail
3: Over Temp
3: Fan Lock
3: Over Light Source
Usage Time
(3 = Error)
iii. Press this button to go back to the remote network operation page.

Controlling the projector using PJLink application

This projector supports standard protocol PJLink for projector control and you can control and
monitor projector's operations using the same application among projectors of different models
and different manufacturers.
About PJLink
• To use PJLink function, the PJLink application software is required.
• For the specifications of PJLink, access to the Web site of Japan Business Machine and
Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
54 Controlling the projector remotely
i
i
iii
®
for the first time.
Description
The light source fails to ignite or turns off during operation.
The projector temperature is too high or cannot be
detected.
The fan rotation speed cannot be set or detected.
The light source is still in use after the light source warning
messages display.
ii