Mono Operation
Input
2-Ch.
+ L–
+ R–
– L+
– R+
–
+
+
–
4 ohm
4 ohm
2-Channel Input
Rear XCard*
Front XCard*
LP
LP
Front XCard
Rear XCard
*Note: XCard can be inserted in HP, LP, or Full Range
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Gain for front and rear operates independently
• Impedance for front bridged channel should be no less than 4
• Impedance for rear bridged channel should be no less than 4
• Front XCard can be set for High-Pass, Low-Pass or Full Range
• Rear XCard can be set for High-Pass, Low-Pass or Full Range
– 17 –