Table of Contents
Advertisement
SONY
Output Configuration
BKDS-7161
BKDS-7162
18 • • Configuration Guide
This section describes the output boards that can be added to a DVS-7200. The
switcher has a total of 19 outputs (comprised of individual outputs and "groups")
that can be configured individually:
•
One Program group (four individual outputs, configured as one)
•
One Preview
•
One Clean
•
Thirteen Auxiliary
•
One Edit Preview/Aux 14
•
One M/E 1 group (two individual outputs, configured as one)
•
One M/E 2 group (two individual outputs, configured as one)
Configuration is accomplished by installing the desired output module (either
Analog Composite or SDI) on the standard OUT-9 Mother Board included with the
DVS-7200 electronics. Output module options are described below.
Analog Composite Output Module
The BKDS-7161 Analog Composite Output Module provides one analog
composite output. The board installs onto the OUT-9 Mother Board (which is
standard with the DVS-7200).
Digital Output Module
The BKDS-7162 Digital Output Module provides one SDI output. The board
installs onto the OUT-9 Mother Board (which is standard with the DVS-7200).
DVS-7200 • Product Guide
Advertisement
Table of Contents
