Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Planet POE-171A-60
Summary of Contents for Planet POE-171A-60
- Page 1 Single-Port 10/100/1000Mbps 802.3bt PoE Injector POE-171A Series User’s Manual...
- Page 2 Further, PLANET reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
- Page 3 PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred. Information in this User’s Manual is subject to change without notice and does...
- Page 4 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET POE-171A Series User’s Manual Model: POE-171A-60, POE-171A-95 Revision: 1.0 (January, 2018) Part No.: 2350-AF0620-000...
-
Page 5: Table Of Contents
Table of Contents 1. Package Contents ............. 6 2. Product Features............... 7 3. Product Specifications ............9 4. Product Outlook .............. 11 5. Hardware Installation ............15 5.1 Before Installation ............ 15 5.2 POE-171A series Installation ........15 5.3 POE-171A series and POE-172S Installation ....16 5.4 POE-171A series and POE-E304 Installation .... -
Page 6: Package Contents
Model LAN Port Speed PoE Standard PoE Budget POE-171A-60 10/100/1000Mbps IEEE 802.3af/at/bt 60 watts POE-171A-95 10/100/1000Mbps IEEE 802.3af/at/bt 95 watts Please unpack the box of the device carefully, and the box should contain the following items: 802.3bt PoE injector x 1 User’s manual x 1... -
Page 7: Product Features
2. Product Features Interface 2 RJ45 interfaces ¾ 1-port Data + Power output ¾ 1-port Data input 1 DC 52~56V input power socket 1 PoE mode (Standard/Legacy) DIP switch Power over Ethernet Complies with IEEE 802.3af/at/bt PoE end-span/mid-span ... - Page 8 PSE (Power Sourcing Equipment) is a device (switch, or hub for instance) that will provides power in a PoE setup. Maximum allowed contin- uous output power per such device in IEEE 802.3af is 15.4W, and in IEEE 802.3at is 30W. Note PD (Powered Device) is a PoE-enabled terminal by PSE and thus consumes energy, such as PoE...
-
Page 9: Product Specifications
3. P roduct Specifications Product POE-171A-60 POE-171A-95 Hardware Specifications 1 x RJ45 STP Input Port Data In Interface 1 x RJ45 STP Output Port PoE (Data + Power) Out DC Socket 1 x 52~56V DC input socket Twisted-pair cable up to 100 meters... - Page 10 Power Consumption 72 watts max. 130 watts max. No. of devices that can be powered Power over Ethernet PoE Standard IEEE 802.3af/at/bt Ultra PoE PSE DC 54V / 60-watt DC 54V / 95-watt PoE Power Output PoE via 4-pair PoE via 4-pair Budget DC 54V / 30-watt DC 54V / 30-watt...
-
Page 11: Product Outlook
4. Product Outlook 802.3bt Power over Ethernet Injector PoE Mode Standard Legacy Figure 1: POE-171A-60 outlook 802.3bt Power over Ethernet Injector PoE Mode Standard Legacy Figure 2: POE-171A-95 outlook... - Page 12 LED Indicators: Color Function Lights to indicate the 802.3bt PoE injector Green has power. Lights to indicate the device is providing PoE-in-Use Orange PoE power. Lights to indicate the device is working in Legacy Orange Legacy mode. PoE Usage LED can monitor the DC input PoE Usage Orange voltage or the status of the power usage.
- Page 13 Monitor power usage of POE-171A-60: Description 1. Off to indicate the PoE usage is less than 9W. 2. Blinks to indicate that the PoE usage is around 10W to 19W. 3. Lights to indicate the PoE usage is around 20W to 29W.
- Page 14 1. Blinks to indicate that the PoE usage is around 75W 90W+ to 89W. 2. Lights to indicate the PoE usage is maximum. PoE Mode: PoE Mode Description Standard Fully conforms to the IEEE 802.3af/at/bt standard. The legacy detection is to identify the PD devices that did not fully follow the IEEE 802.3af/at/bt Legacy standard, their unique electrical signatures, in...
-
Page 15: Hardware Installation
5. Hardware Installation The following section describes the hardware features of POE-171A series. Before connecting any network device to it, please read this chapter carefully. 5.1 Before Installation Before your installation, it is recommended to check your network environment. If there is any IEEE 802.3bt device that needs to be powered on and works normally, the POE-171A series provides you with a way out to supply power to this Ethernet device conveniently and easily. -
Page 16: Poe-171A Series And Poe-172S Installation
Data Power Data PoE PTZ 110-240V AC Power IP Camera POE-171A-60 1000BASE-T UTP AC-to-DC Adapter 802.3bt PoE Injector 1000BASE-T UTP with PoE Figure 3: Connecting architecture with IEEE 802.3af/at/bt device Once POE-171A series detects the existence of an IEEE 802.3af/ at/bt device, the PoE-in-Use LED indicator will be steadily on to show it is providing power. -
Page 17: Poe-171A Series And Poe-E304 Installation
110-240V AC Digital POE-172S 12V/19V/24V Power Signage Ultra PoE Splitter POE-171A-60 AC-to-DC Adapter 1000BASE-T UTP 802.3bt PoE Injector 1000BASE-T UTP with PoE Power Line (DC) Figure 4: Connected Architecture over POE-171A series and POE-172S 1. According to IEEE 802.3af/at/bt Power over... - Page 18 POE- 171A series and PD. 6. Once POE-E304 detects the existence of an IEEE 802.3af/at device, the “PoE OUT” LED indicator will be steadily ON to show it is providing power. Switch POE-171A-60 Data Data Power Power Data...
-
Page 19: Customer Support
Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. - Page 20 For the following equipment: *Type of Product : Single-Port 10/100/1000Mbps 802.3bt PoE Injector *Model Number : POE-171A-60, POE-171A-95 * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on 2014/30/EU.