Lifting The Wheelchair; Removing And Fitting The Rear Wheels - Invacare MyOn HC User Manual

7.3 Lifting the wheelchair

IMPORTANT!
– Never lift the wheelchair by removable parts
(armrests, footrests).
– Ensure the backrest posts are securely in place.
A
1. Fold the wheelchair, see chapter 7.2 Folding and
unfolding the wheelchair, page 43.
2. Always lift the wheelchair by gripping the frame at
points A.

7.4 Removing and fitting the rear wheels

WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during
use. This can lead to overturning.
– Always ensure that the removable axles are
fully engaged whenever you fit a wheel.
1587473-B
A
A
A
Removing the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
3. With the other, hold the wheel through the external
spoke rim around the wheel hub.
4. Using your thumb, press the removable axle button A.
Keep it pressed and pull the wheel out of the adapter
sleeve B.
Fitting the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
3. With the other, hold the wheel through the external
spoke rim around the wheel hub.
4. Using your thumb, press the removable axle button and
hold it down.
Transport
45