Downloading The Process Values Stored Following An Alarm; Displaying Instantaneous Process Values For The Compressor Inverter - Beko DRYPOINT RA eco 7200 Instructions For Installation And Operation Manual

Technical description

8.15.8 Downloading the process values stored following an alarm

NOTE!
The following operation must exclusively be carried out by authorised
and qualified skilled personnel.
Process values for stored alarms can be downloaded in .txt format onto a USB
stick after resetting an alarm (see section 8.15.6, step 7-), or from the screen
for consulting the alarms log file (see section 8.15.7, step 7-).
Preliminary steps
- Switch OFF the dryer by means of the main switch (pos.1 of control panel -
see section 8.1)
- Open the hatch on the control panel with the special key provided with the
dryer.
- Insert a formatted USB stick in the relevant port on the back of the touch
screen display module.
- Close the hatch on the control panel carefully.
- Switch ON the dryer.
1-
Press the button to access the process value download function.
2-
Confirm that the process values are to be downloaded with OK, or exit the
operation with Cancel.
3-
Confirm the download operation was successful with OK.
4-
Press the button to return to the previous screens
Final steps
- Switch OFF the dryer by means of the main switch (pos.1 of control panel -
see section 8.1)
- Open the hatch on the control panel with the special key provided with the
dryer.
- Remove the USB stick.
- Close the hatch on the control panel carefully.
- Switch ON the dryer.

8.15.9 Displaying instantaneous process values for the compressor inverter

1-
With the dryer operating (ON mode), Press the
dryer's menu of functions.
2-
Press the button to display the list of instantaneous process values for
the compressor variable speed drive.
3-
Scroll through the list of values using the
4-
Press the button to return to the previous screen at any time.
NOTE!
The dryer must be started and the compressor running to show the current
compressor variable speed drive process values.
With dryer stopped (STANDBY) all values shown are "0"
22
button to access the
buttons.
1-
2-
3-
4-
1-
2-
4-
3-
DRYPOINT® RA 5400-10800 eco